First Side Led Light Pcb Assy - Brother PDS-5000 Service Manual

9.27 First side LED light PCB ASSY

(1) Remove the two taptite bind B M3x10 (black) screws to remove the first side LED light
PCB ASSY, and disconnect the first side LED light PCB harness from the first side LED
light PCB ASSY.
Note:
• Do not touch the LED section of first side LED light PCB ASSY.
First side LED light PCB ASSY
First side LED light PCB harness
Assembling Note:
• When attaching the first side LED light PCB ASSY, insert the tab of first side LED light
PCB ASSY into the groove.
Harness routing: Refer to
Tab
Taptite bind B M3x10 (black)
Fig. 3-65
"6. Upper base ASSY"
3-51
Groove
and "8. First side LED light PCB harness".
Confidential