Checking Multi-Feed Function - Brother PDS-5000 Service Manual

(10) The following window appears and the machine turns OFF.
Click the [OK] button. The window shown below closes.

2.2 Checking Multi-feed Function

Perform the steps below to check the machine's condition after repair or adjustment.
(1) Confirm that the machine is connected to your computer via USB cable.
(2) Set the test charts (density chart TC-027, density chart CTC-001, and density chart
TC-023) in the document feeder.
(3) Start the DS Capture.
The window below appears on the screen. Click the [Setup] button.
4-23
Confidential