Led Indications (Ads-1000W Only) - Brother ADS-1000W User Manual

Appendix

LED Indications (ADS-1000W only)

The LED indications shown in the table below are used in the illustrations in this chapter
The LED is on.
The LED is blinking quickly.
The LED is blinking slowly.
The LED is off.
Status
Ready
Sleep Mode
Selecting Scan
to PC
Selecting Scan
to USB
Selecting Scan
to Net Device 1
Selecting Scan
to Net Device 2
Connecting
(Scan to PC)
Connecting
(Scan to Net
Device 1)
1 1 1
/ / /
1 1
/ /
1 1
/ /
1 1
/ /
1 1 1
/ / /
1 2 3
The machine is ready to scan.
/ / /
The machine is in Sleep mode
(Power Save mode). The
machine acts as though it is
turned off. Do one of the
following to wake up the
machine:
The machine will enter Ready
mode.
Scan to PC is selected. To
1 2
/ /
start scanning, press
Scan to USB is selected. To
1
/
start scanning, press
Scan to Net Device 1 is
selected. To start scanning,
1 2
/ /
press
Scan to Net Device 2 is
selected. To start scanning,
2
/
press
Connection between the
machine and your device is in
progress.
Descriptions
 Press .
 Open the Top Cover.
 Load your document.
.
.
B
B
.
.
223