Brother PDS-5000 Service Manual page 117

(12) The window below appears on the screen.
Set the adjustment chart (OD Chart) shown in the picture again so that the "A" comes at
the bottom and click the [OK] button. (Same sheet as the procedure (10))
Note:
• If you set the OD Chart on the ADF right after the procedure (11) completes, the
screen below doesn't appear and the adjustment starts immediately.
(13) The window below appears on the screen.
Set the adjustment chart (OD Chart) shown in the picture again so that the "A" comes at
the bottom and click the [OK] button. (Same sheet as the procedure (10))
Note:
• If you set the OD Chart on the ADF right after the procedure (12) completes, the
screen below doesn't appear and the adjustment starts immediately.
(14) The following window appears and the machine turns OFF.
Click the [OK] button. The window shown below closes.
4-15
Confidential