Section 1
1.1 Disclaimer
The information in this manual has been carefully checked and is believed to be accurate.
However, Hach assumes no responsibility for any inaccuracies that may be contained in this
manual. In no event will Hach be liable for direct, indirect, special, incidental, or consequential
damages resulting from any defect or omission in this manual, even if advised of the possibility
of such damages. In the interest of continued product development, Hach reserves the right to
make improvements in this manual and the products it describes at any time, without notice or
obligation.
1.2 Safety information
Please read the entire manual before unpacking, setting up, or operating this analyzer.
Pay particular attention to all warning and caution statements. Failure to do so could result in
serious injury to the operator or damage to the equipment.
To ensure the protection provided by this equipment is not impaired, do not use or install this
equipment in any manner other than that which is specified in this manual.
1.2.1 Use of hazard information
Indicates a potentially or imminently hazardous situation which, if not avoided, will result in
death or serious injury.
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in
death or serious injury.
Indicates a potentially or imminently hazardous situation that may result in minor or moderate
injury.
Indicates a situation which, if not avoided, may cause damage to the instrument. Information
that requires special emphasis.
General Information
DANGER
WARNING
CAUTION
NOTICE
5