Section 15 Accessories And Spare Parts; Instrument; Sensor - Hach ORBISPHERE K1200 User Manual

Section 15 Accessories and Spare Parts

15.1 Instrument

32534.MM
LQV161.52.20000 Thermal printer USB for 410/51x controller (EU)
LQV161.53.20000 Thermal printer USB for 410/51x controller (USA)
LQV161.66.20000 Thermal printer USB for 410/51x controller (AUS/NZ)
LQV161.80.20000 Thermal printer USB for 410/51x controller (CN)
LQV161.82.20000 Thermal printer USB for 410/51x controller (UK)

15.2 Sensor

Important Note: The shelf-life of the K1200 LDO spot is 2 years prior to first use.
Part No.
K1200-S00
K1200-S00H
32510.03
32510.05
32510.10
32510.15
32510.20
K1200-H
K1200-L
Part No.
32531.03 Ethernet cable for wall and panel instruments including connectors, length = 3m
Ethernet cable for wall and panel instruments including connectors,
32531.10
total length = 10m
Ethernet cable for wall and panel instruments including connectors,
32531.20
total length = 20m
32534.03 PROFIBUS-DP cable including SUB-D 9 female connector (length = 3 m)
PROFIBUS-DP cable including SUB-D 9 female connector, total length = MM, price
added per meter of length greater than 3 m
32959A Converter RS232/RS-485
32963 Wall mounting kit
32964 Panel mounting kit
32965 Locking key for wall instruments
32970 Cap to protect USB connector
32972 Pipe mounting kit for wall instrument
32973 PROFIBUS-DP upgrade kit (includes board and software key)
32975 Power supply connector (10-30 VDC) for panel and wall instruments
Pressure reducer for calibration gas bottles with 0.1 L/min. flow, 5/8" x 18
33015
connection, max 70 bar
33092 Measurement board for K-type and M-type sensors
DG33263 IP65 sealing kit for 410 and 510 panel instruments
LZP273 Thermal printer paper (4 rolls)
Luminescent oxygen sensor for on-line water applications, low range 0-2000 ppb,
28 mm ORBISPHERE fitting
Luminescent oxygen sensor for on-line water applications, high range 0-40 ppm,
28 mm ORBISPHERE fitting
Sensor cable (3 m) to connect K1200 type sensors with ORBISPHERE 410/510
instruments
Sensor cable (5 m) to connect K1200 type sensors with ORBISPHERE 410/510
instruments
Sensor cable (10 m) to connect K1200 type sensors with ORBISPHERE 410/510
instruments
Sensor cable (15 m) to connect K1200 type sensors with ORBISPHERE 410/510
instruments
Sensor cable (20 m) to connect K1200 type sensors with ORBISPHERE 410/510
instruments
33087 O-ring kit for 28 mm K1200 type sensors
33103 K1200 spot mounting tool
28129 Protection cap for 28 mm sensors
High level spare optical spot for K1200 sensors
Low level spare optical spot for K1200 sensors
Description
Description
99