Section 2 General Information; Safety Information; Use Of Hazard Information; Precautionary Labels - Hach 5740sc User Manual

Galvanic membrane dissolved oxygen sensor
Table of Contents

Advertisement

Section 2

2.1 Safety Information

2.1.1 Use of Hazard Information

2.1.2 Precautionary Labels

This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.
This symbol, when noted on a product enclosure or barrier, indicates that a risk of electrical shock and/or
electrocution exists.
This symbol, if noted on the product, indicates the need for protective eye wear.
This symbol, when noted on the product, identifies the location of the connection for Protective Earth (ground).
This symbol, when noted on the product, identifies the location of a fuse or current limiting device.

2.2 General Sensor Information

General Information
Please read this entire manual before unpacking, setting up, or operating this equipment.
Pay attention to all danger and caution statements. Failure to do so could result in serious
injury to the operator or damage to the equipment.
Do not use or install this equipment in any manner other than that specified in this manual.
DANGER
Indicates a potentially or imminently hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that may result in minor or moderate
injury.
Important Note: Information that requires special emphasis.
Note: Information that supplements points in the main text.
Read all labels and tags attached to the instrument. Personal injury or damage to the
instrument could occur if not observed
The Galvanic Membrane Dissolved Oxygen Sensor allows aqueous samples to be easily
and accurately analyzed for dissolved oxygen concentration. The system consists of a
controller with an integrated display and a sensor for in-situ measurement.
The sensor can be using the sc100
Optional equipment, such as mounting hardware for the probe, is supplied with
instructions for all user installation tasks. Several mounting options are available, allowing
the probe to be adapted for use in many different applications.
Typical applications include aeration basins, nutrient removal in equalization basins,
aerobic and anaerobic digesters, effluent streams, rivers, lakes, and fish ponds.
(Section 4 on page
13) or sc1000 controller.
客服:400 688 9809
7

Advertisement

Table of Contents
loading

Table of Contents