Maintenance and Troubleshooting
Note: Use the Diagnostic view for troubleshooting. Refer to
Note: If the RTC battery is running low, the date and time of the instrument are reset. Also, on startup the
instrument will automatically reboot after the initial startup is complete.
96
Alarm - There is a severe problem causing the channel to
•
be out of action, and the system alarm relay to be enabled
Warning - Events less critical than a system alarm (e.g.
•
measurement alarm)
Information - For information only; no action is required
•
In addition to the above, if the RTC battery is running low and needs to be
changed, the icon illustrated left is displayed in the bottom right corner of the
numerical view screen.
If using a portable instrument, this icon blinks alternatively with the standard
battery icon.
Sensor diagnostics on page
91.