Selecting The Reverse Rotation-Prohibit - Omron SYSDRIVE 3G3JV Series User Manual

Basic Operation

5-7 Selecting the Reverse Rotation-prohibit

This parameter is used to specify whether to enable or disable the reverse
rotation command sent to the Inverter from the control circuit terminals or
Digital Operator.
The parameter should be set to "not accept" when the Inverter is applied to
systems that prohibit the reverse rotation of the Inverter.
Selecting the Reverse Rotation-prohibit (n05)
Reverse Rotation-prohibit Selection
n05
Setting 0, 1
range
Set Values
Value
0 Accept
1 Not accept
Unit of 1
setting
Description
Chapter 5
Changes during No
operation
Default setting 0
5-17