Setting Frequency References Through Key Sequences - Omron SYSDRIVE 3G3JV Series User Manual

Basic Operation
5-5-4 Setting Frequency References through Key
Sequences
The following description provides information on parameters related to
frequency reference settings through key sequences on the Digital Opera-
tor
Setting Frequency References 1 through 8 and the Inching
Frequency Command (n21 through n28 and n29)
A total of nine frequency references (frequency references 1 through 8) and an inching
frequency command can be set together in the Inverter.
Setting Frequency References 1 through 8 (n21 through n28)
Frequency Reference 1
n21
Setting 0.0 to max. frequency
range
Frequency Reference 2
n22
Setting 0.0 to max. frequency
range
n23 Frequency Reference 3
Setting 0.0 to max. frequency
range
n24 Frequency Reference 4
Setting 0.0 to max. frequency
range
Frequency Reference 5
n25
Setting 0.0 to max. frequency
range
Frequency Reference 6
n26
Setting 0.0 to max. frequency
range
Frequency Reference 7
n27
Setting 0.0 to max. frequency
range
Unit of 0.01 Hz
setting (see note 1)
Unit of 0.01 Hz
setting (see note 1)
Unit of 0.01 Hz
setting (see note 1)
Unit of 0.01 Hz
setting (see note 1)
Unit of 0.01 Hz
setting (see note 1)
Unit of 0.01 Hz
setting (see note 1)
Unit of 0.01 Hz
setting (see note 1)
Chapter 5
Changes during Yes
operation
Default setting 6.0
Changes during Yes
operation
Default setting 0.0
Changes during Yes
operation
Default setting 0.0
Changes during Yes
operation
Default setting 0.0
Changes during Yes
operation
Default setting 0.0
Changes during Yes
operation
Default setting 0.0
Changes during Yes
operation
Default setting 0.0
5-11