Selecting The Reverse Rotation-Prohibit - Omron SYSDRIVE 3G3JV User Manual

Basic Operation
5-7

Selecting the Reverse Rotation-prohibit

This parameter is used to specify whether to enable or disable the reverse rotation com-
mand sent to the Inverter from the control circuit terminals or Digital Operator.
The parameter should be set to "not accept" when the Inverter is applied to systems that
prohibit the reverse rotation of the Inverter.
H Selecting the Reverse Rotation-prohibit (n05)
n05
Reverse Rotation-prohibit Selection
Setting 0, 1
range
Set Values
Value
0 Accept
1 Not accept
5-16
Unit of 1
setting
Description
Chapter 5
Changes during No
operation
Default setting 0