ECOTEST SPECTRA MKS-11GN Operating Manual page 46

2.3.3.7.3 Vibration
"Vibration" item contains the following settings (Fig. 21):
• ON Vibro – makes it possible to enable or disable vibration
signals when switching the device on and off;
• Key Vibro – makes it possible to enable or disable vibration
during manipulations with the device controls;
• Alarm Vibro – makes it possible to enable or disable the
vibration alarm triggered by exceeding the threshold level of
radiation;
• Law bat Vibro – makes it possible to enable or disable the
vibration alarm when the device's battery is law.
Figure 21 – Setting vibration signals
45