Viewing control and the way of data display are identical to operation
in expert mode in the process of radionuclides identification.
2.3.3.7 The mode of the device setup
To switch to the setup mode, move the device's joystick to the
left or to the right (depending on the current operating mode of the
device).
"SET" inscription in the left upper corner of the display indicates
to operation in this mode.
The device setup mode includes the following items (Fig. 18):
• Display – backlight setup,
• Sound – setting sound notifications and alarms,
• Vibro – setting vibrating notifications and alarms,
• Light – setting light notifications and alarms,
• Language – choice of the language of data display on the
device display,
Figure 18 – Device setup mode
41