ECOTEST SPECTRA MKS-11GN Operating Manual page 33

If the set threshold level of alarm triggering by the safety level is
exceeded, the
alarm is also enabled as specified in the device's settings.
In exceeding the set threshold level of alarm actuation by
accumulated dose, the
vibration alarm also turns on according to the device's settings.
2.3.3.6 Radionuclides identification mode
To switch to the radionuclide identification mode, move the
device's joystick to the left or to the right, depending on the current
operating mode of the device.
In the left upper corner of the display, you can find "ID" that
shows the current operating mode you are in.
Figure 8 – Radionuclides identification mode
The radionuclides identification mode includes the following items
(Fig. 8):
• Start identification: launches the identification process
• Saved spectra: allows you to view the saved spectra.
To go to the desired menu item, move the device's joystick up or
down until this option is highlighted with a cursor, and then press the
central joystick button to confirm that you want to go to this item.
icon appears, and light, sound, and/or vibration
icon appears, and the light, sound, and/or
32