List Of Network Function - Mitsubishi Electric MELSEC iQ-R RD78G4 User Manual

3.2

List of Network Function

The following table lists the functions of CC-Link IE TSN. For details on the functions, refer to the following.
MELSEC iQ-R Motion Module User's Manual (Network)
Cyclic transmission
Data are periodically exchanged among stations on the network using slave label.
Function
Communications using slave label
Transient transmission
Uses for communications at arbitrary timing.
Function
SLMP communication
Ethernet connection
This function connects an Ethernet device to a module without interfering with CC-Link IE TSN.
Function
Connection with MELSOFT products and
a GOT
Connection with SLMP-compatible Ethernet
devices
Security
This function ensures optimal security according to the network environment by restricting access for each communication
path to the CPU module.
Function
Remote password
IP filter
RAS
Function
Slave station disconnection
Station type duplication, IP address duplication
detection
Time synchronization
Others
Function
Automatic detection of connected devices (iQSS)
Slave station parameter automatic setting
Label access to the remote device
Searching CPU modules on the network
3 FUNCTION LIST
26
3.2 List of Network Function
Description
Regularly communicates data between the stations on the same network by using the slave label of the
Motion module.
Description
Reads/writes data from/in the device memory of the self-station or another station CPU module on the
CC-Link IE and the buffer memory of the intelligent function module, via Ethernet from the upper system.
Description
Allows programming and monitoring of the CPU module using
the engineering tool, and monitoring and testing of the CPU module from the GOT via Ethernet.
Connects commercially available SLMP-compatible devices.
Description
Prevents illegal access of the CPU module from a remote location for each function.
Identifies the IP address of the access source to limit access to the Motion module.
Description
In star topology, the data link of the slave station where an error occurred is stopped, and data link
continues only for slave stations that are operating normally.
Detects master station duplication and IP address duplication.
Automatically sets the time of the CPU module and the remote device by IEEE1588 or IEEE802.1AS
synchronization.
Description
Reflects the installation status of network configuration in the network configuration setting of the master
station on engineering tool. At startup of the system, it supports the network configuration setting of the
master station when slave stations are added.
Parameters of the slave station on CC-Link IE TSN set using the engineering tool are written in the data
memory of the CPU module or the SD memory card, and those are automatically set via the master
station when the slave station is returned/replaced by power ON or connected.
To slave stations on the network, it allows labels and FBs are used like the proximity module.
Searches Ethernet function installed modules that are connected with the same hub as the engineering
tool, and it displays the list of the search result.