Lubrication Guide- Compressor; Application Guide - Sullair E900H User Manual

E900H USER MANUAL
3.4 LUBRICATION GUIDE— COMPRESSOR
FLUID TYPE
Sullair AWF (I)
SAE 10W SE, SF, SG, CD
MIL-L-2104E 10W
(l) Sullair part numbers for Sullair AWF are 250030-757 (5 gallons/18.9 liters) and 250030-758 (55 gallon drum/280 liters)
3.5

APPLICATION GUIDE

Sullair air compressors are supplied with Sullair AWF
which is a heavy duty multi-viscosity, all weather fluid
which provides an extended change interval when
compared to other fluids. Detergent motor oils (SAE
10W Class SE, SF, SG, or CD) can also be used.
Any of these oils are suitable under conditions where
severe oil oxidation can occur.
Water must be drained from the separator tank
periodically. In high ambient temperature and
humidity conditions,
emulsify with the oil forming a "milky" color. SAE
10W is especially prone to this condition. The fluid
should be changed if this condition develops.
32
CHANGE PERIOD/HOURS
condensed moisture
02250203-986 R01
1500
250
250
DO NOT mix different fluids. Combinations of
different fluids can lead to operational problems such
as foaming, plugged filters, blocked orifices or lines.
When ambient conditions exceed the recommended
ranges, or if other conditions warrant the use of other
extended life lubricants, contact your local Sullair
representative for recommendations.
Sullair encourages users to participate in a fluid
analysis program. The analysis might indicate a need
for change
recommended in this manual. Sullair Corporation
can
offers a fluid analysis for Sullair AWF. Contact Sullair
for details.
SECTION 3
AMBIENT TEMPERATURE
RANGE °F (°C)
-20 to 125 (-29 to 49)
0 to 100 (-18 to 38)
0 to 100 (-18 to 38)
intervals different from those