Lubrication Guide - Compressor; Application Guide; Lubrication Guide - Engine - Sullair 900XH Operators Manual And Parts Lists

Section 3
SPECIFICATIONS

3.2 LUBRICATION GUIDE - COMPRESSOR

FLUID TYPE
Sullair AWF (I)
Mobil Rarus SHC 1026
Mobil Rarus SHC 1024
(I) Sullair part numbers for multi-viscosity lubricants are 250030-757 for 5 gallon / 20 liter container, and
250030-758 for 55 gallon / 208 liter container.

3.3 APPLICATION GUIDE

Refer to Figure 3-1. Sullair Air Compressors are
supplied with Sullair AWF which is heavy duty multi-
viscosity, all-weather fluid. Sullair AWF also allows
an extended change interval. Detergent motor oils
(SAE 10W Class SE, SF, SG or CD) can also be
used. Any of these oils are suitable under condi-
tions where severe oil oxidations can occur.
Water must be drained from the receiver periodical-
ly. In high ambient temperature and high humidity
conditions, condensed moisture may emulsify with
the oil forming a "milky" color. SAE 10W is espe-
cially prone to this condition. The fluid should be
changed if this condition develops.
CAUTION
DO NOT mix
Combinations of different fluids may lead
to operational problems such as foaming,
filter plugging, orifice or line plugging.
Figure 3-1 Fluid and Fuel Fill Port Locations - Typical Locations
NOTE
When performing a fluid
change or topping off the
fill, the proper level should
be at half of the sight glass,
with the machine off.
26
CHANGE PERIOD, HOURS
500
800
1000
types of fluids.
AMBIENT TEMPERATURE RANGE °F (°C)
-20 to 120 (-29 to 49)
50 to 125 (10 to 52)
-20 to 100 (-29 to 38)
When ambient conditions exceed those noted or if
conditions warrant use of other extended life lubri-
cants, contact Sullair for recommendations.
Sullair encourages the user to participate in a fluid
analysis program. This could result in a fluid change
interval differing from that stated in the manual.
Sullair Corporation offers a fluid analysis program
for Sullair AWF. Contact your local Sullair represen-
tative for details.
D-A Lubricant® Company Inc. offers an analysis
program for users of D-A products and Sullair AWF.
Contact your D-A lubricant supplier or Sullair repre-
sentative for details.

3.4 LUBRICATION GUIDE - ENGINE

For engine oil specifications, refer to the Engine
Operator's Manual.