Compressor Lubrication Guide - Sullair ES-6 Series User Manual

ES-6 USER MANUAL
Table 3-3: Compressor
Type:
Minimum Full Load Operating Pressure:
Maximum Full Load Operating Pressure:
Bearing Type:
Cooling:
Lubricant:
Sump Capacity:
(VI) Compressors are available for pressures up to 175 psi (12.1 bar).
Table 3-4: Motor
Type:
Synchronous Speed
Voltage:
Standard All Sizes Optional All Sizes
Optional All Sizes
Optional 5hp Only
Type:
Insulation Class:
Maximum Ambient Temp.:
Shaft Diameter Fan:
Key Size Fan:
Table 3-6: Fluid Separator Element
Type:
Efficency at Maximum Capacity:
3.2 COMPRESSOR
LUBRICATION GUIDE
Consult Figure 3-1 for fluid fill port location. For best
value and longest uninterrupted service, the ES-6
20
5, 7.5, 10HP/4, 5.5 & 7.5 KW 1.15 S.F.
1800 RPM
230/460v 3 Phase 200v 3 Phase
575v 3 Phase 200v 3 Phase
230v Single Phase
Totally Enclosed Air Over
"F"
40°C (104°F)
Nominal 5/8''
Nominal 3/16" X 1 1/4"
Table 3-5: Fluid Filter
(internal bypass valve set at 25 psig)
Type:
Micron:
Single Stage Fluid Injected Screw Compressor
60 psi (4.1 bar)
Nameplate Pressure (VI)
Anti-friction
Pressurized Fluid
See Section 3.2: COMPRESSOR LUBRICATION
GUIDE
4.6 quarts (4.35 liters)
60Hz
5, 7.5, 10HP/4, 5.5 & 7.5 KW
1500 RPM (5, 7.5HP/4, 5.5 KW)
3000 RPM (10HP/7.5KW)
380/4155 3 Phase 380/415 3 Phase
380/415 3 Phase
-
Totally Enclosed Air Over
"F"
40°C (104°F)
Nominal 5.8"
Nominal 3/16" X 3/16" X 1 1/4"
Spin on, Sullair Proprietary
23 Microns Abs.
Push In Cartridge, Sullair Proprietary
3PPM Maximum
compressor is factory filled with Sullube, a long life
lubricant, unless a different lubricant is requested.
If, due to availability or other reasons, other fluids are
required, follow Section 3.3, Section 3.4 and Table 3-
7:Lubrication Guide.
SECTION 3
50Hz