Agilent Technologies 7100 Technical Note page 8

Set up and Configuration of CE in Empower 3
3
4
5
The default IP address is 192.168.254.11. Please refer to the G7100A User Manual if an IP
Hint
address change is required.
8
Once the IP address is connected, click New to open the
PreConfiguration Utility.
Figure 5 Configuration of the CE
In the Configuration Editor select the Agilent 7100 CE and click Auto
Configure.
Enter the IP address of the instrument and click OK. The instrument is
detected and the CE and DAD appear on the right-hand side of the
configuration window.
Agilent 7100 CE in Empower Environment