Agilent Technologies 7100 Technical Note page 19

Using the CE in Empower
The DAD method screen
On the left side, the DAD method offers the main method parameters to
acquire up to eight signals. Refer to the online help to learn more about
each parameter. Remember to set the stop time either to CE or to the same
time as the Empower run time.
The right side offers additional method parameters, e.g. for spectra
collection and a timetable, in order to change parameters during a run.
Unlike with other Agilent DAD, there is no VIS-lamp available.
Figure 16 DAD method screen
Agilent 7100 CE in Empower Environment 19