Agilent Technologies 7100 Technical Note page 18

Using the CE in Empower
Depending on the used SOP, the following best practices are used.
Hint
a
b
If an entered parameter is out of range, a warning sign is shown. By
hovering with the mouse pointer over the parameter, the message displays
the possible range, e.g. Voltage is out of range [-30kV to 30 kV].
Figure 15
The right-hand side of the method screen offers additional features. The
online help explains each of the features:





18
Ensure that Empower Run Time and Agilent Module Stoptime (for one module) are
synchronized.
Set an Agilent Module Stoptime of 1 min, and set the real sample time in the
sample set screen.
Out of range handling
Replenishment
Preconditioning
Injection
Timetable
Postconditioning
Agilent 7100 CE in Empower Environment