Agilent Technologies 7100 Technical Note page 26

Using the CE in Empower
Refer to the G7100A User manual on the requirements for the bottles, as only specific
NOTE
bottles can be used. For example, they need to be pressure-stable.
The waste bottle should be 500 ml, whereas the electrolyte bottle can also be a 100 ml
bottle. Both bottles are included in the accessory kit.
Following replenishment, tasks can be set up in the CE replenishment table
in the Instrument method:





Figure 19
26
Empty vial: empties a vial into the waste bottle
Fill vial: fills a vial to a user-selectable level from the electrolyte
reservoir
Clean tubes: flushes the replenishment system to clean the tubes
Replenish vial: empties a vial into the waste and fills it up from the
electrolyte reservoir
Wait: waits for a specified time
Replenishment Table
Agilent 7100 CE in Empower Environment