Applications; Installation Guide - Advantech PCIE-1750U User Manual

Board ID
The PCIE-1750U/UH has a built-in DIP Switch that helps define each card's ID when
multiple PCIE-1750U/UH cards have been installed on the same PC chassis. The
board ID setting function is very useful when users build a system with multiple PCIE-
1750U/UH cards. With correct Board ID settings, you can easily identify and access
each card during hardware configuration and software programming.
Reset Protection
When the system has undergone a hot reset (i.e., without turning off the system
power), the PCIE-1750U/UH can either retain outputs values of each channel, or
return to its default configuration as open status, depending on its on-board jumper
setting. This function protects the system from wrong operations during unexpected
system resets.
Note! For detailed specifications of the PCIE-1750U/UH, refer to Appendix A,
Specifications.
1.3

Applications

Industrial ON/OFF control

Switch status sensing

 BCD interfacing
 Digital I/O control
 Industrial and lab automation
 Laboratory & education
1.4

Installation Guide

Before you install your PCIE-1750U/UH card, please make sure you have the follow-
ing necessary components:
 PCIE-1750U/UH card
 PCIE-1750U/UH user manual
 Advantech driver DAQNavi (download from Advantech Website)
 Wiring cable PCL-10137 (optional)
Wiring board ADAM-3937 (optional)

Personal computer or workstation with a PCI Express-bus slot

Some other optional components are also available for enhanced operation:
 Application software: Advantech Navigator (Utility) offered by DAQNavi soft-
ware.
After you get the necessary components and maybe some of the accessories for
enhanced operation of your card, you can then begin the Installation procedures.
3 PCIE-1750U/UH User Manual