Table of Contents
Advertisement
66
Maintenance Section
Refill Capacities and Recommendations
Consult your local Perkins distributor for additional
information on Perkins designed and produced
filtration products.
Refill Capacities and
Recommendations
Refill Capacities
Lubricant Refill Capacity
Illustration 35
Standard pan
Illustration 36
Center pan
Illustration 37
Deep pan
The refill capacities for the engine crankcase reflect
the approximate capacity of the crankcase or sump
plus standard oil filters. Auxiliary oil filter systems will
require extra oil. Refer to the OEM specifications for
the capacity of the auxiliary oil filter.
i06937316
Table 15
Oil Sump
Standard pan
Center pan
Deep pan
(1)
These values are approximate capacities for the crankcase oil
sump which include the standard oil filters that are installed at
the factory. Engines with auxiliary oil filters will require extra oil.
Refer to the OEM specifications for the capacity of the auxiliary
oil filter.
Coolant Refill Capacity
To maintain the cooling system, the total cooling
system capacity must be known. The capacity of the
total cooling system will vary. The capacity will
depend on the size of the radiator (capacity). Table
16 should be completed by the customer for the
maintenance of the cooling system.
Table 16
Approximate Capacity of the Cooling System
g02300456
Compartment or
System
Total Cooling System
(1)
(1)
The total cooling system capacity includes the following compo-
nents: The engine block, the radiator, and all coolant hoses and
lines.
Recommendation
g02300473
Refer to this Operation and Maintenance Manual,
"Fluid Recommendations" for information about the
fluids which are acceptable for this engine.
g02300474
2000 Series Industrial Engines
Approximate Refill Capacities
Engine with 1
(1)
Filter
34 L (36 qt)
60 L (63 qt)
68 L (72 qt)
Liters
M0109073
Engine with 2
Filters
43 L (45 qt)
62 L (66 qt)
70 L (74 qt)
Quarts
Advertisement
Table of Contents
