Table of Contents
Advertisement
M0109073
Illustration 16
Typical example
(1) Exhaust inlet
(2) Aftertreatment identification device
Product Description
The Perkins 2806J-E18TTA Industrial Engine has the
following characteristics:
• Four-stroke cycle
• Mechanically actuated, electronically controlled
fuel injection system
• Two Turbochargers
• Air to air charged cooled
• Aftertreatment system
The Clean Emissions Module (CEM) consists of
Diesel Oxidation Catalyst (DOC).
Engine Specifications
Note: The front end of the engine is opposite the
flywheel end of the engine. The left and the right
sides of the engine are determined from the flywheel
end. The number 1 cylinder is the front cylinder.
(3) Clamps
(4) Exhaust outlet
i07833367
Illustration 17
Cylinder and valve location
(A) Exhaust valve
(B) Inlet valve
Table 1
Arrangement and Cylinders
Bore
Stroke
Aspiration
Product Information Section
Product Description
(5) DOC mounting points
Engine Specifications
Engine
In-Line 6 cylinder
145 mm (5.7 inch)
183 mm (7.2 inch)
21
g06451722
g01387009
2806J
ATAAC
(1)
(continued)
Advertisement
Table of Contents
