Specifications - YASKAWA DeviceNet SI-N3 Technical Manual

14

Specifications

Specifications
Items
Model
SI-N3 Supported Messages
I/O Assembly Instance
DeviceNet Specification
DeviceNet Profile
Input Power
Connector Type
Physical Layer Type
MAC ID Setting
Communications Speed/Baud Rate
Ambient Temperature
Humidity
Storage Temperature
Area of Use
Altitude
Revision History
The revision dates and the numbers of the revised manuals appear on the bottom of the back cover.
MANUAL NO. SIEP C730600 43A
Published in Japan August 2008 08-8
Date of
publication
Date of Publication Revision Number Section
August 2008
YASKAWA ELECTRIC SIEP C730600 43A YASKAWA AC Drive-Option Card DeviceNet Technical Manual
Table 23 Option Specifications
SI-N3
Group 2 Server (UCMM capable)
Explicit Messages: Fragmentation is supported. Up to 32 bytes can be input and output.
Polled I/O Messages: Fragmentation is not supported. Up to 8 bytes can be input and output.
Faulted Node Recovery / Offline Connection Set Messages / Automatic Device Replacement (ADR)
Change of State Message (COS).
COS can be used as an I/O Input Assembly.
Input: 17 types (4~8 bytes)
Output: 18 types (4~8 bytes)
Conformance Level 19: Passed
AC Drive
Voltage: 11~25 Vdc
Current: 40 mA
5-pin open-style screw connector
Isolated Physical Layer
CAN transceiver + photocoupler
Programmable from drive keypad or network:
MAC ID 0 to 63
Programmable from drive keypad or network:
125/250/500 k bit/s
Auto Baud Rate
Idle Mode Detect
Heartbeat
–10 °C to +50 °C
up to 95% RH (no condensation)
–20 °C to +60 °C (allowed for short-term transport of the product)
Indoor (free of corrosive gas, airborne particles, etc.)
up to 1000 m
Date of original
publication
− −
Specifications
Revised Content
First edition
14 Specifications
75