Receiving - YASKAWA DeviceNet SI-N3 Technical Manual

3

Receiving

Please perform the following tasks after receiving the DeviceNet Option:
• Inspect the DeviceNet Option for damage.
If the DeviceNet Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the PCB (see
• If you have received the wrong model or the DeviceNet Option does not function properly, contact your supplier.
Contents and Packaging
Description: Option Card
_
Quantity:
Tool Requirements
A Phillips screwdriver (M3) metric or (#1, #2) U.S. standard size is required to install the DeviceNet Option.
A straight-edge screwdriver (M2) is required to wire the terminal block.
YASKAWA ELECTRIC SIEP C730600 43A YASKAWA AC Drive-Option Card DeviceNet Technical Manual
Table 1 Contents of Package
Ground Cable
1 1
Figure
Screws LED Lael
NS
3 1
3 Receiving
2).
Installation Manual
MANUAL
MS
1
7