Table of Contents
Advertisement
MAINTENANCE
Please remember to never leave the microscope with any of the objectives or eyepieces removed and
always protect the microscope with the dust cover when not in use.
SERVICE
ACCU-SCOPE
microscopes are precision instruments which require periodic servicing to keep them
®
performing properly and to compensate for normal wear. A regular schedule of preventative maintenance
by qualified personnel is highly recommended. Your authorized ACCU-SCOPE
for this service. Should unexpected problems be experienced with your instrument, proceed as follows:
1. Contact the ACCU-SCOPE
problems can be resolved simply over the telephone.
2. If it is determined that the microscope should be returned to your ACCU-SCOPE
ACCU-SCOPE
®
for warranty repair, pack the instrument in its original Styrofoam shipping carton. If you
no longer have this carton, pack the microscope in a crush-resistant carton with a minimum of three
inches of a shock absorbing material surrounding it to prevent in-transit damage. The microscope should
be wrapped in a plastic bag to prevent Styrofoam dust from damaging the microscope. Always ship the
microscope in an upright position; NEVER SHIP A MICROSCOPE ON ITS SIDE. The microscope or
component should be shipped prepaid and insured.
This microscope and its electronic components are warranted to be free from defects in material and workmanship
for a period of five years from the date of invoice to the original (end user) purchaser. LED lamps are warranted for
a period of two years from the date of original invoice to the original (end user) purchaser. The mercury power
supply is warranted for a period of one year from the date of invoice to the original (end user) purchaser. This
warranty does not cover damage caused in-transit, misuse, neglect, abuse or damage resulting from improper
servicing or modification by other then ACCU-SCOPE approved service personnel. This warranty does not cover
any routine maintenance work or any other work, which is reasonably expected to be performed by the purchaser.
Normal wear is excluded from this warranty. No responsibility is assumed for unsatisfactory operating performance
due to environmental conditions such as humidity, dust, corrosive chemicals, deposition of oil or other foreign
matter, spillage or other conditions beyond the control of ACCU-SCOPE INC. This warranty expressly excludes
any liability by ACCU-SCOPE INC. for consequential loss or damage on any grounds, such as (but not limited to)
the non-availability to the End User of the product(s) under warranty or the need to repair work processes. Should
any defect in material, workmanship or electronic component occur under this warranty contact your ACCU-SCOPE
distributor or ACCU-SCOPE at (631) 864-1000.
America. All items returned for warranty repair must be sent freight prepaid and insured to ACCU-SCOPE INC., 73
Mall Drive, Commack, NY 11725 – USA. All warranty repairs will be returned freight prepaid to any destination
within the continental United States of America, for all foreign warranty repairs return freight charges are the
responsibility of the individual/company who returned the merchandise for repair.
ACCU-SCOPE is a registered trademark of ACCU-SCOPE INC., Commack, NY 11725
ACCU-SCOPE
®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
EXI-410 INVERTED MICROSCOPE SERIES
®
distributor from whom you purchased the microscope. Some
LIMITED MICROSCOPE WARRANTY
This warranty is limited to the continental United States of
®
distributor can arrange
®
distributor or to
30
Advertisement
Table of Contents
