Accu-Scope EXI-410 Series Manual page 27

EXI-410 INVERTED MICROSCOPE SERIES
Using Fluorescence
(continued)
Fluorescence Cube Turret
The fluorescence cube turret directs excitation illumination
light from the fluorescence LED unit into the objective. The
turret accepts up to three filter cubes.
Change the filter in the light path by rotating the filter cube
turret. When the filter cube is switched, the fluorescence
LED unit is also automatically switched.
Brightfield positions on the turret are indicated by a
symbol and alternate with the three fluorescence filter cube
positions. Detents on the turret indicate when a filter cube
or brightfield position is engaged. The position of the filter
turret is visible on the edge of the turret wheel from both
the left and right sides of the microscope. When switching
the filter cube, check that the turret clicks at the desired
filter cube or brightfield position.
NOTE: a UV light shield is included with the EXI-410-FL
version to reduce extraneous light from the fluorescence
sample.
ACCU-SCOPE ®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 26