Accu-Scope EXI-410 Series Manual page 16

Objectives
To install the objectives:
1. Turn the coarse adjustment knob ① until the revolving
nosepiece is at its lowest position.
2. Remove the nosepiece cap ② closest to you and
thread the lowest magnification objective onto the
nosepiece opening, then rotate the nosepiece
clockwise and thread the other objectives from low to
high magnification.
NOTE: ● Always rotate the nosepiece by using the
knurled nosepiece ring.
● Keep the covers on any unused
nosepiece openings to prevent dust and
dirt from getting inside.
Stage Plate
Insert the clear glass stage plate ① into the opening on
the stage. The clear glass allows you to view the
objective in position.
Eyepieces
Remove the eyetube plugs and fully insert the eyepieces
① into the eyepiece tubes ②.
ACCU-SCOPE ®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
EXI-410 INVERTED MICROSCOPE SERIES
①
②
①
①
②
15