GLP Highlander Wash User Manual page 18

www.glp.de
Load Settings
No
Default
Settings
Yes
Information
System Version
Temperatures
Errors
Counters
DMX Monitor
Network
CRMX
Main AC
Manual Control
No
Lamp On/Off
Yes
No
Reset All
Yes
No
Reset Pan &
Tilt
Yes
No
Reset Head
Yes
18
Preset 1
Preset 2
Preset 3
Default
Lamp Counters
Fixture Counters
Misc
Configure all fixture
settings to a user preset –
hold for 3 secs.
Return fixture to default
settings (not including
DMX address, protocol
type, Ethernet / CRMX
configuration, user offsets,
user presets and counters)
– hold for 3 secs.
Return fixture to default
settings (not including
DMX address, DMX mode,
user offsets, user presets,
counters and temperature
units)
Shows current fixture
software version
Shows current sensor
temperatures
Shows most recent and
current errors, if any
Resettable and total
counters for lamp strikes
and hours that lamp has
been powered on
Counter for total number
of power cycles;
resettable and total
counters for hours fixture
has been powered on
Number of times fixture
has carried out automatic
emergency shutdown
Shows DMX values
currently being received
on each channel
Shows network status
information
Shows CRMX status
information (if optional
CRMX module is fitted)
Shows AC power voltage
information
Power lamp on/off
Reset all effects
Reset pan and tilt
Reset all effects except
pan and tilt
Highlander Wash
User Manual