Delaying The Start Time Of The Pyrolytic Cleaning Programme; At The End Of The Pyrolytic Cleaning Programme - Miele HR1956 Operating Instructions Manual

Delaying the start time of the
Pyrolytic cleaning programme
 To delay the start of the Pyrolytic
cleaning programme, select
 Confirm with OK.
 Set the time at which you want it to
start.
 Confirm with OK.
The door will lock automatically.
and the set start time will appear in the
display.
You can alter the start or end time using
Change at any point up until the start of
the programme.
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on automatically. The
remaining duration of the programme
will appear in the display.
At the end of the Pyrolytic cleaning
programme
When the duration remaining reaches
Start later . 00:00 h, a message will appear in the
display to tell you that the door is
unlocking.
When the door lock has been released,
– Process finished
display.
Start at
– a buzzer will sound if the buzzer is
switched on (see "Settings - Volume -
Buzzer tones").
 Switch the oven off.
The visual and acoustic signals are
switched off.

Wait until the oven has cooled down
before removing residual soiling left
in the oven compartment from
pyrolytic cleaning.
 Wipe any residues (e.g. ash) left
behind after the Pyrolytic cleaning
programme out of the oven
compartment and off the pyrolytic
accessories. The amount of ash will
vary depending on how dirty the oven
was.
Cleaning and care
appears in the
Danger of burning!
125