To Delay The Start Time Of The Pyrolytic Cleaning Programme; At The End Of Pyrolytic Cleaning - Miele H2561BP Operating And Installation Instructions

To delay the start time of the
Pyrolytic cleaning programme
Start the programme as described
above and then set the required finish
time within the first five minutes of
starting the programme.
 Confirm with OK.
 Press  repeatedly until  starts to
flash.
The display will then show the finish
time calculated from the current time of
day plus the duration of the selected
Pyrolytic cleaning programme.
 Confirm with OK.
The hours will flash.
 Set the hours using the  button.
 Confirm with OK.
The minutes block will flash.
 Set the minutes using the  button.
 Confirm with OK.
The finish time is now set and has been
saved to memory.
The oven heating switches off.
The finish time can be changed at any
time up until the start time for the
programme.
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on. The duration will show in
the display.
Cleaning and care

At the end of pyrolytic cleaning

  

,  and  will appear in the
display.
The door is locked as long as the 
symbol is lit up. The  symbol will start
flashing as soon as the door lock has
been released.
  

When the door lock has been released:
–  will go out.
–  will flash.
– A buzzer will sound, if this option is
selected (see "Clock/timer - Altering
settings").
 Turn the function selector to 0.
The visual and acoustic signals will
switch off.

Danger of burning: wait until the
oven has cooled down before
removing residual soiling left in the
oven compartment from pyrolytic
cleaning.

81