The Pyrolytic Cleaning Programme Is Cancelled - Miele HR1956 Operating Instructions Manual

Cleaning and care
Most residues can be removed with
warm water, a little washing-up liquid
and a clean sponge or a clean, damp
microfibre cloth.
Depending on the level of soiling, a
visible deposit can build up on the
glass on the inside of the oven door.
This can be removed with a
dishwashing sponge, a glass scraper
or a stainless steel spiral pad and a
little washing-up liquid.
 Extend and retract the FlexiClip
telescopic runners several times after
running the Pyrolytic cleaning
programme.
Please note:
– The fibreglass seal around the front
of the oven should be handled
carefully. Do not rub and scour it. If
possible, you should avoid cleaning
it.
– The FlexiClip telescopic runners and
the knurled nut may appear
discoloured or have light patches
after they have been cleaned. This
will not affect the functionality in any
way.
– Enamelled surfaces can be
permanently discoloured by spilled
fruit juice. Such discolouration does
not affect the properties of the
enamel. Do not attempt to remove
these marks.
126
The Pyrolytic cleaning programme is
cancelled
If the Pyrolytic cleaning programme is
cancelled, the oven door will remain
locked until the temperature inside the
oven drops to below 280 °C.
The following will cause the Pyrolytic
cleaning programme to stop:
– Switching the oven off.
– A power cut.
If you turn the oven off,
off? will appear in the display.
 Select
if you want to cancel the
Yes
Pyrolytic cleaning programme.
The door will unlock once the
temperature in the oven has dropped
below 280 °C, and the oven is switched
off.
 Select
No if you want to continue
running the Pyrolytic cleaning
programme.
The Pyrolytic cleaning programme will
continue running.
Switch appliance