Tools And Fasteners Needed - Kirsch Cellular Shade Collection Getting Started

Thank you for purchasing the Kirsch
operation, and care, your new shades will provide years of beauty and performance.
To get started, unpack the shade and remove all foam/packaging materials. Check that all
parts shown on the packing list are included with the order. Please thoroughly review this
instruction booklet before beginning the installation.
IMPORTANT: Cords are wrapped around a cord organizer located approximately 6" from
the top of the moving rail. Please do not unwrap the cords until instructed to do so.

Tools and Fasteners Needed

⁄ " Hex, Flat Blade and magnetic-tipped Phillips Screwdrivers
1
■ ■
4
Level (laser level is recommended)
■ ■
Measuring tape and pencil
■ ■
Power drill, ⁄ " drill bit, and
3
■ ■
32
Scissors
■ ■
In addition, you will need fasteners designed to work with your specific mounting surface(s).
#6 Hex Head Screws (Provided). Two 1
■ ■
Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws long enough for a secure attachment.
■ ■
Speed Nuts and Screws (Provided). Extension brackets come with speed nuts and screws.
■ ■
Drywall Anchors (Not Provided). Use drywall anchors when mounting into drywall.
■ ■
Valance Types
Determine the type of valance you are installing with your shade: aluminum or traditional.
■ ■
GETTING STARTED
®
Cellular Shade Collection. With proper installation,
⁄ " hex driver
1
4
⁄ " screws are provided per installation bracket.
1
2
#6 x 1 " Longer #6 Hex Head Screw
1
2
Hex Head Screw for Use with Spacer Blocks
(Provided)
Aluminum Valance
Corner
End Cap
Return
Traditional Valance
Dovetail Brackets
Corner
Bracket
Return
(Two Provided with
(Not Provided)
Each Extension Bracket)
Valance Clips
1 " Cell
1
4
Size
" Cell
3
4
Size
Valance Clips
1 " Cell
1
4
" Cell
3
Size
4
Size
2
Do Not
Unwrap
Cords
Speed Nut
and Screw