Kirsch Cellular Shade Collection Getting Started page 10

Install the stationary rail bracket.
■ ■
Hook the stationary rail bracket to the headrail as illustrated below.
➤ ■
After hooking it to the headrail, you may allow the stationary rail to hang freely.
➤ ■
Stationary
Rail Bracket
Stationary
Rail
Position the stationary rail bracket.
■ ■
To move the stationary rail bracket, pull the bottom of the rail into the room slightly before sliding the bracket.
➤ ■
Outside Mount: Move the stationary rail bracket so that the stationary rail is aligned with the end of the gear box.
➤ ■
Inside Mount: Move the stationary rail bracket so that the stationary rail is flush against the jamb.
➤ ■
Outside Mount
Align
Outside Mount: Attach the stationary rail bottom bracket. The bracket may be attached to the wall or floor. In most cases, to
■ ■
avoid drilling into the floor it is attached to the wall.
Level the stationary rail front to back and side to side.
➤ ■
Attach the stationary rail bottom bracket using the screw provided.
➤ ■
If you used spacer blocks or extension brackets with the installation brackets, use an extension bracket to mount the
➤ ■
stationary rail away from the wall.
CAUTION: Use drywall anchors when mounting into drywall.
Level the
Stationary
Rail
INSTALLATION
INSTALLATION
Inside Mount
Flush
Against
Jamb
Wall Stationary
Rail
Stationary Rail
Bottom Bracket
9
Stationary Rail
Wall
Bottom Bracket
Extension
Bracket
Stationary
Rail