Analog Devices ADSP-BF537 EZ-KIT Lite Getting Started page 27

Programming ADSP-BF537 EZ-KIT Lite with VisualDSP++
fices the detailed view but allows you to simulate much more
quickly, at millions of simulated cycles per second depending on
the speed of your PC.
For a more comprehensive discussion and exercises concerning the
simulators' unique features, refer to the VisualDSP++ Getting
Started Guide, available in the VisualDSP++ Help system.
• Emulator. This is a JTAG emulator, the ideal device for connect-
ing to hardware, giving the best performance and maximum
flexibility. An emulator is a separate module that provides a
high-bandwidth USB or PCI connection between the PC and the
target device. An emulator is required to connect to a non-EZ-KIT
Lite target.
• Legacy target. This is a target created in VisualDSP++ 4.0 or a
prior version.
Throughout this tutorial, we will use the EZ-KIT Lite connection.
To tell VisualDSP++ that your target is an ADSP-BF537 processor on an
EZ-KIT Lite, you must create and activate a new session. Follow these
steps:
1. From VisualDSP++' Session menu, select New Session, which
launches the Session Wizard
2. On the Select Processor page, ensure that Processor family is set to
Blackfin. In Choose a target processor, select ADSP-BF537.
Click Next.
3. On the Select Connection Type page, select EZ-KIT Lite.
Click Next.
Getting Started with ADSP-BF537 EZ-KIT Lite
www.BDTIC.com/ADI
(Figure 1-2).
1-5