Purpose Of This Manual - Analog Devices ADSP-BF537 EZ-KIT Lite Getting Started

Purpose of This Manual

• Other features
JTAG ICE 14-pin header
The EZ-KIT Lite board has flash memory with a total of 4 MB. The flash
memory can be used to store user-specific boot code, allowing the board
to run as a stand-alone unit. The board also has 64 MB of SDRAM, which
can be used by the user at runtime.
interfaces with the audio circuit, facilitating development of audio
SPORT0
signal processing applications.
nector for communication with other serial devices.
The UART of the processor connects to an RS-232 line driver and a DB9
female connector, providing an interface to a PC or other serial device.
Additionally, the EZ-KIT Lite board provides access to all of the proces-
sor's peripheral ports. Access is provided in the form of a three-connector
expansion interface.
For information about the hardware components of the EZ-KIT Lite,
refer to the ADSP-BF537 EZ-KIT Lite Evaluation System Manual.
Purpose of This Manual
The Getting Started with ADSP-BF537 EZ-KIT Lite familiarizes users with
the hardware capabilities of the evaluation system and demonstrates how
to access these capabilities in the VisualDSP++ environment.
EZ-KIT Lite users should use this manual in conjunction with the
ADSP-BF537 EZ-KIT Lite Evaluation System Manual, which describes the
evaluation system's components in greater detail.
xii
www.BDTIC.com/ADI
also connects to an off-board con-
SPORT0
Getting Started with ADSP-BF537 EZ-KIT Lite