Analog Devices ADSP-BF537 EZ-KIT Lite Getting Started page 82

Part 4: Running an Application from Flash Memory
3. Click OK to save the changes as your project options.
4. Rebuild the project file.
Now the created loader file is ready to be placed into the flash memory.
To place the file using the Flash Programmer:
1. Select Flash Programmer from the Tools menu. The Flash Pro-
grammer dialog box
Figure 3-7. Flash Programmer Dialog Box – Driver Tab
2. On the Driver page, click Browse to locate the driver file
<install_path>\Blackfin\Examples\ADSP-BF537 EZ-Kit
Lite\Flash Programmer\BF537EzFlashDriver.dxe
3. Click Load Driver to load the driver file.
4. Click the Programming tab
3-16
www.BDTIC.com/ADI
(Figure 3-7) appears on the screen.
(Figure 3-8).
Getting Started with ADSP-BF537 EZ-KIT Lite