Analog Devices ADSP-BF537 EZ-KIT Lite Getting Started page 56

Part 2: Creating a TCP/IP Application and Connecting to a
DHCP Server
Figure 2-1. VDK Project with LwIP TCP/IP Stack
3. On the LwIP Ethernet Application Settings page, click Next.
4. On the Add Startup Code/LDF page, ensure that Add an LDF and
startup code is selected. Click Finish to close the wizard.
The LwIP stack, as distributed with VisualDSP++, relies on the
presence of a DHCP server on your network. If your network does
not support DHCP, the LwIP library must be rebuilt using a static
IP address assigned by the network administrator. For details
regarding rebuilding the LwIP library with a static IP address, refer
to the
LWIP_UserGuide.doc
fin\lib\src\lwip\docs
2-4
www.BDTIC.com/ADI
file in the
<install_path>\Black-
directory.
Getting Started with ADSP-BF537 EZ-KIT Lite