Load The Last Setup - Fourier MultiLogPRO User Manual

After the fourth sensor has been selected, the screen will list the next
4 sensors:
You can press the Enter button in the last input if you want to go back to the first
input.
When you've finished selecting the sensors press the Escape button
must complete the setup, as detailed in section 0.
Note: When you turn the MultiLogPRO off it will save the setup for the next session.

Load the Last Setup

When you turn MultiLogPRO on, once the self testing has been completed, it will
display:
Press the Enter button
Fourier Systems Ltd.
16 Hamelacha St., POB 11681, Rosh Ha'ayin 48091,
Tel: +972-3-901-4849, Fax: +972-3-901-4999
www.FourierEdu.com
In–5: Empty

In–6: Empty
In–7: Empty
In–8: Empty
RATE = 10/s
SAMPLES = 500
DISPLAY = numeric
. The arrow indicator will point to the Rate command and you
_ _ _ I N I T I A L I Z A T I O N _ _ _
I n i t . D i s p l a y
I n i t . A D C
I n i t . R A M
B a t t . 9 9 %
E N T E R – l o a d s e t u p
to load the last setup.
EXPERIENCE SCIENCE!