Technical Support - Fourier MultiLogPRO User Manual

I started a new logging session and the
data logger
afterwards.
MultiLogPRO's memory is empty – there
are no stored files or experiment notes.

Technical Support:

Fourier Help Desk:
E‐mail: support@fourieredu.com
Contact information:
1 866 771 6682 (toll‐free from within USA only)
1 708 478 5333
Hours of Operation:
Monday ‐ Friday, 9AM to 5PM (UTC ‐06:00)
Fourier Systems Ltd.
16 Hamelacha St., POB 11681, Rosh Ha'ayin 48091,
Tel: +972-3-901-4849, Fax: +972-3-901-4999
www.FourierEdu.com
stopped immediately

The trigger condition was fulfilled,
but the time period was too short
(less than 300S).

First check if the sampling rate
was so fast that the experiment
began and ended in less than a
second. If this is not the reason,
recharge the 7.2 V battery of the
MultiLogPRO and
MultiLogPRO monitors the battery
power during the logging. If the
battery voltage is less then 5V,
the logging
automatically.

The internal 3 V disk
battery is dead. Replace
the battery.
EXPERIENCE SCIENCE!
try again.
is stopped
30