Introduction
The MultiLogPRO is a powerful standalone 12-bit data
logger with a clear LCD graphic display and a 128K internal
memory. Recorded data is displayed in the form of graphs,
tables, meters or digital displays, and can be analyzed with a
number of pre-programmed analysis functions.
The MultiLogPRO's internal memory stores experiment
notes and instructions for carrying out the experiment, which
can be edited or expanded at any time. These features
enable MultiLogPRO to function independently from a
computer - a perfect solution for when there is a shortage of
computers in the laboratory.
MultiLogPRO can record data from up to 8 sensors simultaneously; it is capable of
recording at rates of up to 21,000 samples per second, and of collecting up to
100,000 samples in its internal memory.
MultiLogPRO is very easy to use because all its functions are broken down into 8
icon menus, and its four buttons can browse every menu and execute any of the
commands. In addition, when a sensor is plugged in, the MultiLogPRO automatically
recognizes the type of sensor, and will record the data with the appropriate units.
A rechargeable battery powers the data logger, which shuts off automatically after 15
minutes have passed since the time of the last data recording, since the time the last
button was pressed, or since the time the last communication with the PC.
MultiLogPRO includes a built-in, easy to use, accurate Timer module that enables
the measuring of several types of timing events.
Together with the TI–83 Plus calculator, MultiLogPRO becomes a complete portable,
handheld data collection and analysis system.
The large variety of sensors with which MultiLogPRO is compatible makes the unit a
true digital Lab, which can measure scientific phenomena from the fields of Physics,
Chemistry, Biology and the environmental sciences.
Fourier Systems Ltd.
16 Hamelacha St., POB 11681, Rosh Ha'ayin 48091,
Tel: +972-3-901-4849, Fax: +972-3-901-4999
www.FourierEdu.com
EXPERIENCE SCIENCE!
Need help?
Do you have a question about the MultiLogPRO and is the answer not in the manual?