Menu Icons And Commands - Fourier MultiLogPRO User Manual

Menu Icons and Commands

Start
Setup
Function
Fourier Systems Ltd.
16 Hamelacha St., POB 11681, Rosh Ha'ayin 48091,
Tel: +972-3-901-4849, Fax: +972-3-901-4999
www.FourierEdu.com
Escape
Return to the main menu or stop recording
(Stop)
Start recording
Press the Enter button to start recording
Setup MultiLogPRO in 4 steps:
Rate – Select recording rate
Samples – Select the total number of recording points
Display – Select the way MultiLogPRO will display the data (at a
rate of up to 10 samples per second):

Numeric - Displays the sensor values and the sample number

Meter - Displays all active sensors in a bar meter display
along with their values

Table - Displays the last 6 values of all the active sensors in a
table

Graphic - Displays a graphic representation of the sampled
sensors
At rates higher then 10/s the MultiLogPRO will display the data in
a graph at the end of the logging period.
Start – Press the Forward arrow to start recording
Display statistics of the current data

Minimum – The minimum graph value

Maximum – The maximum graph value

Average – The graph average
EXPERIENCE SCIENCE!