Do 2 Sensor Calibration; Screen Contrast; Connect To A Computer Or To A Ti Calculator - Fourier MultiLogPRO User Manual

Press the Forward arrow button
distance sensor you are using.
DO Sensor Calibration
2
If you need to calibrate a DO
enter the DO calibration screen:
2
Use the arrow buttons to select between 0, 5, 10, 15, 20, 25, 30 and 35 ppt and
press the Enter button to confirm and move to calibrate altitude.
Use the arrow buttons to select between 0, 500, 1000, 1500, 2000, 2500, 3000 and
3500 ft and press the Enter button to confirm.
MultiLogPRO will display the calculated upper limit of the calibrated range and will
exit the DO calibration screen.
2
The new calibration parameters will be saved until the next time you change them.

Screen Contrast

Use the arrow buttons to adjust the LCD screen contrast.
Any contrast adjustment will be saved until the next time you change it.

Connect to a Computer or to a TI Calculator

Press the Forward arrow
arrow button to connect to a TI calculator
Fourier Systems Ltd.
16 Hamelacha St., POB 11681, Rosh Ha'ayin 48091,
Tel: +972-3-901-4849, Fax: +972-3-901-4999
www.FourierEdu.com
sensor press the Forward arrow button
2
_ _ _ _ _ D O 2 C A L _ _ _ _ _
U s e t h e f o l l o w i n g
m e n u t o c a l i b r a t e
t h e D O 2 e l e c t r o d e .
S a l i n i t y : 0 p p t
button to connect to a computer or the Backward
to choose between the 2m and 10m
EXPERIENCE SCIENCE!
to