Time, Speed And Acceleration - Fourier MultiLogPRO User Manual

3. Timing begins each time a body
blocks the photogate and ends when
unblocking
MultiLogPRO
elapsed time between entering and
leaving the gate and the speed of the
body
4. Use the arrow buttons to scroll
between the time and speed results
5. Press Escape
timing menu
6. Press Escape
return to the main menu

Time, Speed and Acceleration

In this mode MultiLogPRO measures the crossing time at the first gate, the time it
takes the body to move from one gate to the second gate and the crossing time at
the second gate and returns the time between gates, the average speed and the
average acceleration.
Press Enter
(the body that blocks the gate) width in mm between 0 to 59mm
Press Enter
distance between the photogates in cm between 0 to 99cm
Press Enter
timing standby mode
Fourier Systems Ltd.
16 Hamelacha St., POB 11681, Rosh Ha'ayin 48091,
Tel: +972-3-901-4849, Fax: +972-3-901-4999
www.FourierEdu.com
the photogate.
then displays the
to return to the
a second time to
_ _ _ _ _ T I M I N G _ _ _ _ _
 M o d e : T i m e S p e e d
M e a s u r e : I n 1 – >
C a r d w i d t h : 3 0 m m
G a t e s d i s t a n c e : 2 0 c m
S t a r t ( > )
twice, then use the arrow buttons to select the card
, then use the Forward
, then use the Forward
3. Timing begins each time a body
enters the first photogate (input 1)
and ends when leaving the second
photogate (input 2). MultiLogPRO
then displays the
between entering the gates and the
body's average velocity
4. Use the arrow buttons to scroll
between the time and speed results
5. Press Escape
timing menu
6. Press Escape
return to the main menu
A c c
I n 2
arrow button to select the
arrow button to enter to a
EXPERIENCE SCIENCE!
elapsed time
to return to the
a second time to