Adjust Display Orientation (Optional) - Emerson Rosemount 5408 Quick Start Manual

May 2019
7

Adjust display orientation (optional)

To improve field access to wiring or to better view the optional LCD display:
Prerequisites
Note
In high vibration applications, the transmitter housing must be fully
engaged into the sensor module to meet the vibration test specifications.
This is achieved by rotating the transmitter housing clockwise to thread
limit.
Procedure
1. Loosen the set screw until the transmitter housing can rotate
smoothly.
2. First, rotate the housing clockwise to the desired location. If the
desired location cannot be achieved due to thread limit, rotate the
housing counterclockwise to the desired location (up to 360° from
thread limit).
3. Re-tighten the set screw.
Figure 7-1: Rotate the Transmitter Housing
Quick Start Guide
Torque 30 in-lb (3 N-m)
H3/32 in.
Quick Start Guide
21