Adjust Display Orientation (Optional) - Emerson Rosemount 5408 Quick Start Manual

Quick Start Guide
5.0

Adjust display orientation (optional)

To improve field access to wiring or to better view the optional LCD display:
1. Loosen the set screw until the transmitter housing can rotate smoothly.
2. First, rotate the housing clockwise to the desired location. If the desired
location cannot be achieved due to thread limit, rotate the housing
counterclockwise to the desired location (up to 360° from thread limit).
3. Re-tighten the set screw.
Figure 1. Rotate the Transmitter Housing
10
Torque 30 in-lb (3 N-m)
H3/32 in.
October 2017