Table of Contents
Advertisement
Table 28: Specifications - Indoor Wireless Subscriber Modem
Operating Temperature:
Antenna:
Dimensions (L x W x H):
Weight:
1
Frequency range dependant on installed radio option, license, and regulatory domain.
2
Actual Ethernet data throughput is dependent on channel size, protocols, packet size,
burst rate, transmission latency, and link distance.
3
Based on a subscriber unit with integrated vertical antenna and stand attached
6.3
Subscriber Log Messages
Log Message
Add classifier [CID:
XXXX, Idx: nn]
Broadcast Opportunity
Corrupted
Broadcast Ranging
Opportunity Received
Broadcast Ranging
Opportunity Timeout
Classifier deleted [Idx:
nn]
Classifiers deleted for SF
with CID XXXX
DCD Receiving Timeout
Deregistration DREG-
CMD, action code: nn
Deregistration DREG-
CMD, action code: nn
DHCP Error
Downlink Burst Profile
Adjusted [BP: nn]
Downlink Burst Profile
Change Attempt [BP: nn]
Downlink Channel
Inoperable
Downlink SF nn changed
70-00057-01-01-DRAFT
RedMAX
-5 C to 40 C
Integrated flat panel (10 dBi)
8.9 x 7.0 x 20.6 cm (3.5 x 2.74 x 8.12 in)
0.45 Kg (1.0 lb)
Table 29: Troubleshooting - Event Log Messages
Description
A classifier with the following CID has been added.
Opportunities have been received for initial ranging, but
the opportunity is not appropriate (i.e. too short) for this
subscriber.
This message indicates that the base station has provided
an opportunity for subscriber registration.
This message indicates that the base station has not
provided an opportunity for new subscriber registration
within the last 10 seconds.
The specified classifier has been deleted.
All classifiers have been cleared for the specified service
flow.
The subscriber has not received downlink channel
descriptors for five consecutive opportunities. The
subscriber will now restart the ranging process in an
attempt to re-establish wireless synchronization.
The subscriber has de-registered.
base station has requested that subscriber should
deregister.
There has been an error in obtaining a DHCP lease
Downlink modulation rate has been adjusted by the base
station.
A request to change the downlink modulation rate has
been made based on locally configured CINR thresholds.
This message is displayed when the subscriber detects
the presence of a base station, but is unable to properly
synchronize with it.
Changes have been successfully applied to the specified
downlink service flow.
Proprietary Redline Communications © 2006
Page 53 of 60
™
Subscriber Modem
3
User Manual
3
December 13, 2006
Advertisement
Table of Contents
