5.3.11 privacySS - Privacy Commands
The privacySS mode allows you to view and modify the privacy settings for the
subscriber. The following table lists all commands available in this mode.
Command
set
show
70-00057-01-01-DRAFT
RedMAX
Table 20: CLI - privacySS - Privacy Commands
Description
Change privacy related settings on subscriber. All times are in seconds.
Enable:
0 -- Disable privacy.
1 -- Enable privacy.
UseTestTimers:
0 -- Use programmed timers
1-- Use test defaults.
AuthWaitTime: - Auth Req retransmission interval from Auth Wait state.
ReauthWaitTime: - Auth Req retransmission interval from ReauthWait
state.
AuthGraceTime: - Time prior to Authorization expiration SS begins
reauthorization.
OperationalWaitTime: - Key Req retransmission interval from Op Wait
state.
RekeyWaitTime: - Key Req retransmission interval from Re-key Wait
state.
TekGraceTime: - Time prior to TEK expiration SS begins re-keying.
AuthRejectWaitTime: - Delay before resending Auth Request after
receiving Auth Reject.
Display privacy related settings on subscriber. For example:
Structure --- <<SS privacy Data>>
Enabled:............Disabled(0)
UseTestTimers:......Normal(0)
AuthWaitTime:.......10
ReauthWaitTime:.....10
AuthGraceTime:......600
OperationalWaitTime:1
RekeyWaitTime:......1
TekGraceTime:.......3600
AuthRejectWaitTime:.60
Proprietary Redline Communications © 2006
™
Subscriber Modem
Page 44 of 60
User Manual
December 13, 2006